---
agentTools:
  projectIndex: https://docs.iotcreators.com/llms.txt
---

# Quectel BC95-G/BC68

AT command guide for: Quectel BC95-G and BC68

Please be aware that we cannot guarantee for the completeness and accuracy of this page. For detailed information and latest versions of the AT command guides, please always refer to the supplier's specifications and manuals.
You can contact us at :e-mail: docwriters (at) iotcreators (dot) com in case this collection doesn't work for you!

[block:api-header]
{
  "title": "Vendor's AT commands manual"
}
[/block]

<https://www.quectel.com/download/quectel_bc95-gbc68_at_commands_manual_v1-5/>

[block:api-header]
{
  "title": "General AT Commands"
}
[/block]

[block:parameters]
{
  "data": {
    "h-0": "Purpose",
    "h-1": "Command String",
    "0-0": "Configure/start a manual network selection",
    "0-1": "AT+COPS =<mode>[,<format>[,<oper>[,<AcT>]]]\n\nFor example: AT+COPS=1,2,\"26201\"",
    "1-0": "Check the received signal quality",
    "1-1": "AT+NUESTATS",
    "2-0": "Check the supported/configured bands of the UE",
    "2-1": "AT+NBAND?",
    "3-0": "Check the network registration status",
    "3-1": "AT+CEREG?",
    "4-0": "Configure the APN for IP-based connection",
    "4-1": "AT+CGDCONT=1,\"IP\",\"<APN_name>\"",
    "5-0": "Configure/activate the PSM mode",
    "5-1": "AT+CPSMS=[<mode>[,<Requested_Periodic-RAU>[,<Requested_GPRS-READYtimer>[,<Requested_Periodic-TAU>[,<Requested_Active-Time>]]]]]\n\nFor example: AT+CPSMS=1,,,01000001,00000101",
    "6-0": "Check the firmware version",
    "6-1": "AT+CGMR",
    "7-0": "Switch ON / OFF the transceiver",
    "7-1": "AT+CFUN=0 / AT+CFUN=1; AT+CGATT=1"
  },
  "cols": 2,
  "rows": 8
}
[/block]

[block:api-header]
{
  "title": "AT Commands for Communication Protocols"
}
[/block]

[block:parameters]
{
  "data": {
    "h-0": "Purpose",
    "h-1": "Command String",
    "0-0": "Configure/activate Rel. 13 Early Release Assistance Indicator",
    "0-1": "AT+NSOSTF=<socket>,<remote_addr>,<remote_port>,<flag>,<length>, <data>\n\nFor example: AT+NSOSTF=1,192.158.5.1,1024,0x200,2,AB30",
    "1-0": "Configure/activate the eDRX mode",
    "1-1": "AT+CEDRXS=[<mode>,[,<AcT-type>[,<Requested_eDRX_value>]]]",
    "3-0": "Create a TCP/UDP socket and send data to remote via socket",
    "3-1": "AT+NSOCR=<type>,<protocol>,<listen port>[,<receive control>]\n\nFor example: AT+NSOCR=DGRAM,17, 5685,1",
    "2-0": "Modify eDRX parameters",
    "2-1": "**Step 1: **Set eDRX value:\nAT++CEDRXS=[<mode>,[,<AcT-type>[,<Requested_eDRX_value>]]]\n\nFor example: AT+CEDRXS=1,5,0101\n\n**Step 2: **Change Paging Transmission Window:\nAT+NPTWEDRXS=[<mode>,[,<AcT-type>[,< Requested_Paging_time_window>[,<Requested_eDRX_value>]]]]\n\nFor example: AT+NPTWEDRXS=1,5, 1110,0101",
    "4-0": "Send data to remote via socket",
    "4-1": "AT+NSOST=<socket>,<remote_addr>,<remote_port>,<length>,<data>\n\nFor example: AT+NSOST=1,192.158.5.1,1024,2,AB30"
  },
  "cols": 2,
  "rows": 5
}
[/block]