---
agentTools:
  projectIndex: https://docs.iotcreators.com/llms.txt
---

# Quectel BG96

AT command guide for: Quectel BG96

Please be aware that we cannot guarantee for the completeness and accuracy of this page. For detailed information and latest versions of the AT command guides, please always refer to the supplier's specifications and manuals.
You can contact us at :e-mail: docwriters (at) iotcreators (dot) com in case this collection doesn't work for you!

[block:api-header]
{
  "title": "Vendor's AT commands manual"
}
[/block]

<https://www.quectel.com/download/quectel_bg96_at_commands_manual_v2-3/>

[block:api-header]
{
  "title": "General AT Commands"
}
[/block]

[block:parameters]
{
  "data": {
    "h-0": "Purpose",
    "h-1": "Command String",
    "0-0": "Configure/start a manual network selection",
    "0-1": "AT+COPS =<mode>[, <format>[,<oper>[,<AcT>]]]\n\nFor example : AT+COPS=1,2,\"26201\"",
    "1-0": "Check the received signal quality",
    "1-1": "AT+QENG=\"servingcell\"\n\n\"servingcell\",<state>,\"LTE\",<is_tdd>,<mcc>,<mnc>,<cellid>,<pcid>,<earfcn>,<freq_band_ind>,<ul_bandwidth>,<dl_bandwidth>,<tac>,<rsrp>,<rsrq>,<rssi>,<sinr>,<srxlev>",
    "2-0": "Check the supported/configured bands of the UE",
    "2-1": "AT+QCFG=\"band\"",
    "3-0": "Check the network registration status",
    "3-1": "AT+CEREG?",
    "4-0": "Configure the APN for IP-based connection",
    "4-1": "AT+CGDCONT=1,\"IP\",\"<APN name>\"\n\nFor example: AT+CGDCONT=1,\"IP\",\"bm5m-ipv4-tvgwbn1-2.de.iot\"",
    "5-0": "Configure/activate the PSM mode",
    "5-1": "AT+CPSMS=[<mode>[,<Requested_Periodic-RAU>[,<Requested_GPRS-READYtimer>[,<Requested_Periodic-TAU>[,<Requested_Active-Time>]]]]]\n\nFor example: AT+CPSMS=1,,,01000001,00000101",
    "6-0": "Check the firmware version",
    "6-1": "AT+CGMR",
    "7-0": "Modify the supported bands of the UE",
    "7-1": "AT+QCFG=\"band\"[,<gsmbandval>,<catm1bandval>,<catnb1bandval>[,<effect>]]\n\nFor example: AT+QCFG=\"band\",8,1",
    "8-0": "Switch ON / OFF the transceiver",
    "8-1": "AT+CFUN=0 / AT+CFUN=1; AT+CGATT=1"
  },
  "cols": 2,
  "rows": 9
}
[/block]

[block:api-header]
{
  "title": "AT Commands for Communication Protocols"
}
[/block]

[block:parameters]
{
  "data": {
    "h-0": "Purpose",
    "h-1": "Command String",
    "0-0": "Configure/activate the eDRX mode",
    "0-1": "AT+CEDRXS=[<mode>,[,<AcT-type>[,<Requested_eDRX_value>]]]",
    "3-0": "Connect socket to remote address and port",
    "3-1": "AT+QIOPEN=<contextID>,<connectID>,<service_type>,<IP_address>/<domain_name>,<remote_port>[,<local_port>[,<access_mode>]]\n\nFor example: AT+QIOPEN=1,1,\"UDP\",\"10.23.22.85\",5685,3001,1",
    "1-0": "Modify eDRX parameters",
    "1-1": "AT+CEDRXS=[<mode>,[,<AcT-type>[,<Requested_eDRX_value>]]]",
    "4-0": "Send data to remote via socket",
    "4-1": "AT+QISEND=<connectID>\n\nFor example: AT+QISEND=1",
    "2-1": "AT+QIOPEN=<contextID>,<connectID>,<service_type>,<IP_address>/<domain_name>,<remote_port>[,<local_port>[,<access_mode>]]\n\nFor example: AT+QIOPEN=1,1,\"UDP\",\"10.23.22.85\",5685,3001,1",
    "2-0": "Create a TCP/UDP socket and send data to remote via socket"
  },
  "cols": 2,
  "rows": 5
}
[/block]